Instruction for Stirring Pot

Stirring pot manufactured by our company is specially applicable for liquid materials, such as liquid glue and dope used in PCB industry, painting, printing ink and so on, which can be customized to various stirring pots of non-standard special type according to customers' requirements; the stirring pot equipped with various stir heads can meet different technology requirements, meanwhile, it can provide optimum proposals for various stirring technologies.

Features
Conventional type:
● Applicable to stir and disperse materials with low, medium and high speed.
● Propitious to improve mixing homogeneity of high viscosity material by combined stiming.
● Pot body can be equipped with the rmotank or technical conditions, such as cooling and vacuum, according to the technical requirements of materials.

High Viscosity Type:
● This type is specially designed for high viscosity materials, for example, polyester putty,wall filling. lumber filling, tar epoxy and so on.
Ribbon stirring can conduct upward and downward movement of materials.
●The unique wiped-wall structure can ensure the mixing homogeneity of high viscosity materials.
● The stiming device with low speed can improve the flow of high viscosity materials.

Vacuum Type::
● Applicable to stir and disperse materials with different viscosity.
● By operation, the symmetrical twin blades rotate along the inside surface of drum with low speed, meanwhile, the main shaft rotates with high speed, which is suitable for7 special materials with thixotropic property.
● Two different controlled rotation speeds can achieve van ous production demands of different products.
● Performance such as frequency control or explosion proof can be adjusted according to customers actual requirements.

Application
Widely applicable for stiring, mixing, dissolving and dispersing two or more liquids and solid powder in liquid glue manufacturing in PCB industry, dope, printing ink, paper making, adhesive, medication and chemical industry.

Forms of Stirring Blade

六直叶涡轮	螺带-一螺旋桨	圆盘锯齿叶轮	双速组合桨	六凹叶涡轮

Technical Parameters

Type	Nominal Capacity(L)	Cpmtaomer Diameter	Kaclet Doa,eter	Centre Circleof Support	Number of Support	Motor Power(kw )	actual volume(L)
ZS-J50	50	Φ400	Φ500	Φ650	2	0.5	60
ZS-J100	100	Φ500	Φ600	Φ800	2	1.1	120
ZS-J300	300	Φ800	Φ900	Φ1100	4	2.2	360
ZS-J500	500	Φ900	Φ1000	Φ1328	4	2.2	600
ZS-J1000	1000	Φ1200	Φ1300	Φ1595	4	4.0	1200
ZS-J2000	2000	Φ1400	Φ1500	Φ1745	4	5.5	2400
ZS-J3000	3000	Φ1500	Φ1650	Φ1895	4	7.5	3600
ZS-J4000	4000	Φ1600	Φ1750	Φ2015	4	7.5	4800
ZS-J5000	5000	Φ1800	Φ1950	Φ2265	4	7.5	6000

Notes:
● Material of contact segment between the machine and material could be selected among carbon steel, normal stainless steel and other stainless steels.
● By ordering, please indicate material, heating method, impeller name etc
● Sizes listed in above table are only for reference, which can be adjusted under special design and manufacture.

Selection Table of Stirrer Models

Note: Oindicates reliable performance
·According to requirements of customers, we can customize various nonstandard special stiming pots so as to meet different technical requirements.